2 Cycle Modes ,   Adjustable Delta Peak  Best Battery Management Always full batteries Optional Temperature Probe for safe charging of unknown Battery types	Stock #	20156
	Input	9-14V
	Charge Range	1-26 cells, Nicad & Nimh,
	Discharge Current	0.1 - 5A self limitting
	Fast Charge Adjustable Trickle	100mAh - 5A 0 to 250mAh

                

NEW Added Features:

Easy 4 button programming with newly developed logic

5 Basic Programs selected by scrolling up or down

    Charge 1-26 cells NiCad or NiMh 100mAh-5000mAh

    Discharge 1-26 cells NiCad or NiMh 0.1A -5A

    Cycle Mode 1 First Charge then Discharge

    Cycle Mode 2 First Discharge then Charge

    Parameter Setting Display lets you adjust 

Delta Peak Sensitivity for NiCad (5-15mV) and NiMh (3-10mV) batteries separately

Trickle Charge Rate Setting from 0 mAh to 250 mAh after Fast Charge is completed

Precision Voltage Reading in 1 Thousand of one Volt

Readout after charging or discharging gives information for Quality of Battery. 

Delta Peak Point, 

Elapsed Charge time

Average Voltage under load

Accumulated Charge (What is stored in your battery)

How good is your battery ?. Keep a record and compare the data after several charges.

NEW added BATTERY Charging Safety features

Temperature and load watch in the DYMOND SUPER TURBO  Charger regulates the Cooling Fan inside.

Temperature watch will cut off unit when it gets too hot.

Optional Temperature Probe ($ 14.95) can be strapped to battery and will trigger a Completed Charge message and cuts off when the battery gets too hot. Excellent safety feature for unknown battery types.

Maximum Charge Limit. The maximum charge can be  programmed. If you have a 2000 mAh battery, then program a save stop at 2400mAh. Reaching 2400 mAh accumulated charge would turn the charger off in case the Delta Peak Point was too vague and could not be detected. 

Dymond Super Turbo Charger

   When connected to a 12V DC source, the Super Smart Charger welcomes you.  The charger can be used in fully automatic mode right away (Factory setting)  which will recondition the oldest battery packs, breaking loose crystals which might have formed as a result of the 'memory' effect.  The Smart Charger detects your battery pack through a testing program, and recommends the optimum but moderate charging procedure.  You can confirm the automatic charge, or override with your own manual more aggressive (faster charge) settings.  

You also have 10 battery file selections for your favorite battery packs similar to model memories in your computer transmitter.  These files allow you to store preferred charging parameters for your most frequently used battery packs. The selected parameters will stay programmed till you override. Also for your convenience: The last battery you worked with will stay in the memory and comes up automatically when the charger is turned ON.  Internal cooling is supplied through the integral fan unit which allows almost continuous charging at the field.  It can charge and discharge and cycle NiCad, NiMh batteries.  This is the most sophisticated and easy to use charger at an incredible low price.